openmw-tes3mp/files/settings-default.cfg

# WARNING: If this file is named settings-default.cfg, then editing
# this file might have no effect, as these settings may be overwritten
# by your user settings.cfg file (see documentation for its location).
#
# This file provides minimal documentation for each setting, and
# ranges of recommended values.  For detailed explanations of the
# significance of each setting, interaction with other settings, hard
# limits on value ranges and more information in general, please read
# the detailed documentation at the OpenMW Wiki page:
# 
#   https://wiki.openmw.org/index.php?title=Settings
#

[Camera]

# Near clipping plane (>0.0, e.g. 0.01 to 18.0).
near clip = 1

# Cull objects smaller than one pixel.
small feature culling = true

# Maximum visible distance (e.g. 2000.0 to 6666.0).  Caution: this setting
# can dramatically affect performance, see documentation for details.
viewing distance = 6666.0

# Camera field of view in degrees (e.g. 30.0 to 110.0).
# Does not affect the player's hands in the first person camera.
field of view = 55.0

# Field of view for first person meshes (i.e. the player's hands)
# Best to leave this at the default since vanilla assets are not complete enough to adapt to high FoV's. Too low FoV would clip the hands off screen.
first person field of view = 55.0

[Cells]

# Adjacent exterior cells loaded (>0). Caution: this setting can
# dramatically affect performance, see documentation for details.
exterior cell load distance = 1

# Preload cells in a background thread. All settings starting with 'preload' have no effect unless this is enabled.
preload enabled = true

# Preload adjacent cells when moving close to an exterior cell border.
preload exterior grid = true

# Preload possible fast travel destinations.
preload fast travel = false

# Preload the locations that doors lead to.
preload doors = true

# Preloading distance threshold
preload distance = 1000

# Controls whether or not the nodes/collision shapes are pre-"instanced" (i.e. cloned) when a cell is preloaded.
# Enabling this option slightly reduces the time it takes to transition into a preloaded cell, but also results in higher memory usage
# proportional to the number of cells that are preloaded.
preload instances = true

# The minimum amount of cells in the preload cache before unused cells start to get thrown out (see "preload cell expiry delay").
# This value should be lower or equal to 'preload cell cache max'.
preload cell cache min = 12

# The maximum amount of cells in the preload cache. A too high value could cause you to run out of memory.
# You may need to reduce this setting when running lots of mods or high-res texture replacers.
preload cell cache max = 20

# How long to keep preloaded cells in cache after they're no longer referenced/required (in seconds)
preload cell expiry delay = 5

# How long to keep models/textures/collision shapes in cache after they're no longer referenced/required (in seconds)
cache expiry delay = 5

[Map]

# Size of each exterior cell in pixels in the world map. (e.g. 12 to 24).
# Warning: affects explored areas in save files, see documentation.
global map cell size = 18

# Zoom level in pixels for HUD map widget.  64 is one cell, 128 is 1/4
# cell, 256 is 1/8 cell.  See documentation for details. (e.g. 64 to 256).
local map hud widget size = 256

# Enables Fog of War rendering on the HUD map. Default is Off since with default settings
# the map is so small that the fog would not obscure anything, just darken the edges slightly.
local map hud fog of war = false

# Resolution of local map in GUI window in pixels.  See documentation
# for details which may affect cell load performance. (e.g. 128 to 1024).
local map resolution = 256

# Size of local map in GUI window in pixels.  (e.g. 256 to 1024).
local map widget size = 512

# Similar to "[Cells] exterior cell load distance", controls
# how many cells are rendered on the local map. Values higher than the default
# may result in longer loading times.
local map cell distance = 1

[GUI]

# Scales GUI window and widget size. (<1.0 is smaller, >1.0 is larger).
scaling factor = 1.0

# Transparency of GUI windows (0.0 to 1.0, transparent to opaque).
menu transparency = 0.84

# Time until tool tip appears when hovering over an object (0.0 is
# instantly, 1.0 is the maximum delay of about 1.5 seconds).
tooltip delay = 0.0

# Stretch menus, load screens, etc. to the window aspect ratio.
stretch menu background = false

# Subtitles for NPC spoken dialog and some sound effects.
subtitles = false

# Red flash visually showing player damage.
hit fader = true

# Werewolf overlay border around screen or window.
werewolf overlay = true

# Color for tool tips and crosshair when owned by an NPC (R G B A).
color background owned = 0.15 0.0 0.0 1.0
color crosshair owned = 1.0 0.15 0.15 1.0

[HUD]

# Displays the crosshair or reticle when not in GUI mode.
crosshair = true

[Game]

# Color crosshair and tool tip when object is owned by an NPC. (O is
# no color, 1 is tool tip only, 2 is crosshair only, and 3 is both).
show owned = 0

# Always use the best mode of attack: e.g. chop, slash or thrust.
best attack = false

# Difficulty.  Expressed as damage dealt and received. (e.g. -100 to 100).
difficulty = 0

# Show duration of magic effect and lights in the spells window.
show effect duration = false

[General]

# Anisotropy reduces distortion in textures at low angles (e.g. 0 to 16).
anisotropy = 4

# File format for screenshots.  (jpg, png, tga, and possibly more).
screenshot format = png

# Texture magnification filter type.  (nearest or linear).
texture mag filter = linear

# Texture minification filter type.  (nearest or linear).
texture min filter = linear

# Texture mipmap type.  (none, nearest, or linear).
texture mipmap = nearest

[Shaders]

# Force rendering with shaders. By default, only bump-mapped objects will use shaders.
# Enabling this option may cause slightly different visuals if the "clamp lighting" option
# is set to false. Otherwise, there should not be a visual difference.
force shaders = false

# Force the use of per pixel lighting. By default, only bump mapped objects use per-pixel lighting.
# Has no effect if the 'force shaders' option is false.
# Enabling per-pixel lighting can result in visual differences to the original MW engine. It is not
# recommended to enable this option when using vanilla Morrowind files, because certain lights in Morrowind
# rely on vertex lighting to look as intended.
force per pixel lighting = false

# Restrict the amount of lighting that an object can receive to a maximum of (1,1,1).
# Only affects objects that render with shaders (see 'force shaders' option). Always affects terrain.
# Setting this option to 'true' results in fixed-function compatible lighting, but the lighting
# may appear 'dull' and there might be color shifts.
# Setting this option to 'false' results in more realistic lighting.
clamp lighting = true

# If this option is enabled, normal maps are automatically recognized and used if they are named appropriately
# (see 'normal map pattern', e.g. for a base texture foo.dds, the normal map texture would have to be named foo_n.dds).
# If this option is disabled, normal maps are only used if they are explicitely listed within the mesh file (.nif or .osg file).
# Affects objects.
auto use object normal maps = false

# If this option is enabled, specular maps are automatically recognized and used if they are named appropriately
# (see 'specular map pattern', e.g. for a base texture foo.dds, the specular map texture would have to be named foo_spec.dds).
# If this option is disabled, normal maps are only used if they are explicitely listed within the mesh file (.osg file, not supported in .nif files).
# Affects objects.
auto use object specular maps = false

# See 'auto use object normal maps'. Affects terrain.
auto use terrain normal maps = false

# If a file with pattern 'terrain specular map pattern' exists, use that file as a 'diffuse specular' map. The texture
# must contain the layer color in the RGB channel (as usual), and a specular multiplier in the alpha channel.
auto use terrain specular maps = false

# The filename pattern to probe for when detecting normal maps (see 'auto use object normal maps', 'auto use terrain normal maps')
normal map pattern = _n

# Alternative filename pattern to probe for when detecting normal maps. Files with this pattern are expected to include 'height' in the alpha channel.
# This height is used for parallax effects. Works for both terrain and objects.
normal height map pattern = _nh

# The filename pattern to probe for when detecting object specular maps (see 'auto use object specular maps')
specular map pattern = _spec

# The filename pattern to probe for when detecting terrain specular maps (see 'auto use terrain specular maps')
terrain specular map pattern = _diffusespec

[Input]

# Capture control of the cursor prevent movement outside the window.
grab cursor = true

# Key controlling sneak toggles setting instead of being held down.
toggle sneak = false

# Player is running by default.
always run = false

# Zoom in and out from player in third person view with mouse wheel.
allow third person zoom = false

# Camera sensitivity when not in GUI mode. (>0.0, e.g. 0.1 to 5.0).
camera sensitivity = 1.0

# Vertical camera sensitivity multiplier when not in GUI mode.
# (>0.0, Because it's a multiplier values should be near 1.0)
camera y multiplier = 1.0

# Invert the vertical axis while not in GUI mode.
invert y axis = false

[Saves]

# Name of last character played, and default for loading save files.
character =

# Automatically save the game whenever the player rests.
autosave = true

# Display the time played on each save file in the load menu.
timeplayed = false

[Sound]

# Name of audio device file.  Blank means use the default device.
device =

# Volumes are 0.0 for silent and 1.0 for the maximum volume.

# Master volume.  Controls all other volumes.
master volume = 1.0

# Footsteps volume.
footsteps volume = 0.2

# Music tracks volume.
music volume = 0.5

# Sound effects volume.
sfx volume = 1.0

# Voice dialog volume.
voice volume = 0.8

# Minimum size to use for the sound buffer cache, in MB. When the cache is
# filled, old buffers will be unloaded until it's using no more than this much
# memory. Must be less than or equal to 'buffer cache max'.
buffer cache min = 14

# Maximum size to use for the sound buffer cache, in MB. The cache can use up
# to this much memory until old buffers get purged.
buffer cache max = 16

# Specifies whether to enable HRTF processing. Valid values are: -1 = auto,
# 0 = off, 1 = on.
hrtf enable = -1

# Specifies which HRTF to use when HRTF is used. Blank means use the default.
hrtf =

[Video]

# Resolution of the OpenMW window or screen.
resolution x = 800
resolution y = 600

# OpenMW takes complete control of the screen.
fullscreen = false

# Determines which screen OpenMW is on.  (>=0).
screen = 0

# Minimize OpenMW if it loses cursor or keyboard focus.
minimize on focus loss = true

# An operating system border is drawn around the OpenMW window.
window border = true

# Anti-aliasing reduces jagged polygon edges.  (0, 2, 4, 8, 16).
antialiasing = 0

# Enable vertical syncing to reduce tearing defects.
vsync = false

# Maximum frames per second. 0.0 is unlimited, or >0.0 to limit.
framerate limit = 0.0

# Game video contrast.  (>0.0).  No effect in Linux.
contrast = 1.0

# Video gamma setting.  (>0.0).  No effect in Linux.
gamma = 1.0

[Water]

# Enable water shader with reflections and optionally refraction.
shader = false

# Reflection and refraction texture size in pixels. (512, 1024, 2048).
rtt size = 512

# Enable refraction which affects visibility through water plane.
refraction = false

# Draw NPCs and creatures on water reflections.
reflect actors = false

[Windows]

# Location and sizes of windows as a fraction of the OpenMW window or
# screen size. (0.0 to 1.0).  X & Y, Width & Height.

# Stats window displaying level, race, class, skills and stats.
stats x = 0.0
stats y = 0.0
stats w = 0.375
stats h = 0.4275

# Spells window displaying powers, spells, and magical items.
spells x = 0.625
spells y = 0.5725
spells w = 0.375
spells h = 0.4275

# Local and world map window.
map x = 0.625
map y = 0.0
map w = 0.375
map h = 0.5725

# Dialog window for talking with NPCs.
dialogue x = 0.095
dialogue y = 0.095
dialogue w = 0.810
dialogue h = 0.810

# Alchemy window for crafting potions.
alchemy x = 0.25
alchemy y = 0.25
alchemy w = 0.5
alchemy h = 0.5

# Console command window for debugging commands.
console x = 0.0
console y = 0.0
console w = 1.0
console h = 0.5

# Player inventory window when explicitly opened.
inventory x = 0.0
inventory y = 0.4275
inventory w = 0.6225
inventory h = 0.5725

# Player inventory window when searching a container.
inventory container x = 0.0
inventory container y = 0.4275
inventory container w = 0.6225
inventory container h = 0.5725

# Player inventory window when bartering with a shopkeeper.
inventory barter x = 0.0
inventory barter y = 0.4275
inventory barter w = 0.6225
inventory barter h = 0.5725

# Player inventory window when trading with a companion.
inventory companion x = 0.0
inventory companion y = 0.4275
inventory companion w = 0.6225
inventory companion h = 0.5725

# Container inventory when searching a container.
container x = 0.25
container y = 0.0
container w = 0.75
container h = 0.375

# NPC inventory window when bartering with a shopkeeper.
barter x = 0.25
barter y = 0.0
barter w = 0.75
barter h = 0.375

# NPC inventory window when trading with a companion.
companion x = 0.25
companion y = 0.0
companion w = 0.75
companion h = 0.375